Input common mode voltage range |
-0.3V to 3.8V |
CMRR |
95 dB |
Rail-to-rail output voltage swing |
|
Input offset voltage |
1 mV |
Description
The LPV531 is an extremely versatile operational amplifier. A single external resistor gives the system designer the ability to define the quiescent current, gain bandwidth product and output short circuit current. This innovative feature gives the system designer a method to dynamically switch the power level to optimize the performance of the op amp and meet the system design requirements.
The LPV531 can be tailored to a wide variety of applications. It offers the system designer the ability to dynamically trade off supply current for bandwidth by adjusting the current drawn from the ISEL pin using a DAC or switching in different value resistors in series with the ISEL pin. The LPV531 is capable of operating from 73 kHz, consuming only 5 µA, to as fast as 4.6 MHz, consuming only 425 µA. The input offset voltage is relatively independent and therefore is not significantly affected by the chosen power level.
Utilizing a CMOS input stage, the LPV531 achieves an input bias current of 50 fA and a common mode input voltage which extends from the negative rail to within 1.2V of the positive supply. The LPV531's rail-to-rail class AB output stage enables this op amp to offer maximum dynamic range at low supply voltage.
Offered in the space saving 6-pin TSOT23 package, the LPV531 is ideal for use in handheld electronics and portable applications. The LPV531 is manufactured using National's advanced VIP50 process.
A fixed supply current/gain bandwidth is available upon request.
Applications
| | AC coupled circuits |
| | Portable instrumentation |
| | Active filters |
Also Recommended
| LPV521▲ | Low Power, Operates Down To 1.6V |
|
|
Datasheets
Featured Application Notes
All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/packaging/leadfree.
A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/quality/green.
National's certificate of product compliance is located at RoHS Status.
All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/packaging/leadfree.
A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/quality/green.
National's certificate of product compliance is located at RoHS Status.
Reliability Metrics
| Part Number |
Process |
EFR Reject |
EFR Sample Size |
PPM |
LTA Rejects |
LTA Device Hours |
FITS |
MTTF (Hours) |
|
LPV531MK | PVIP050 | 0 | 9960 | 0 | 0 | 855000 | 5 | 242608584
|
|
LPV531MKX | PVIP050 | 0 | 9960 | 0 | 0 | 855000 | 5 | 242608584
|
Note: The Early Failure Rates (EFR) were calculated as point estimate PPM based on rejects and sample size for EFR.
The Long Term Failure Rates were calculated
at 60% confidence using the Arrhenius equation at 0.7eV activation energy and derating the assumed stress
temperature of 150°C to an application temperature of 55°C.
For more information on Reliability Metrics, please click
here.
All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/packaging/leadfree.
A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/quality/green.
National's certificate of product compliance is located at RoHS Status.